Key Features
- Supply representative sample of pressure tested ends
- Collects and Gross tests up to 2% of ends per lane
- Available for all standard end sizes
- Adjustable sample rates
- PLC controlled
- Highlights Gross leakage problems at point of production
- Minimal operator input required
- Low maintenance
- Custom made kick-off lanes which allow the pressure sampler to be easily exchanged with an online Micro Leak Detector
| Capacity | |
|---|---|
| Sample size | Up to 2% of ends produced per lane |
| Test pressure | 3.5 Bar |
| End size | All standard end sizes |
| Detectable leak | 1×10-3 atms cc/sec * |
| Services Required | |
| Power | 110 – 230v, 5 amps, 50/60Hz, Single phase |
| Compressed air | Dry air @ 5–6 Bar |
| Dimensions | |
| APS1800 | 102cm (L) × 52cm (W) × 92cm (H) |
* It is not the recommendation of Ovec Systems Ltd to use pressure sampling as a substitute for Micro Leak testing. Pressure sampling makes use of the utilities required to collect a sample to be tested on an Offline Micro Leak Detector in the absence of an online Micro Leak Detector, allowing the quick detection of Gross Leaks.
Need more information?
Talk directly to the people who built the equipment — no agents, no middlemen.
Manufacturing Partner
